Standard Plan B11-47

NOTES: 1. Maximum distance between turnbuckles shall be 200′-0″±.
2. Intermediate turnbuckles to be placed in adjacent spans.
3. Cable shall not be spliced between intermediate turnbuckles and end posts.
4. Posts to be vertical.
5. Alignment of holes in posts may vary to conform to slope of top of retaining wall.
6. The Contractor shall verify all department dimensions in the field before ordering or fabricating any materials.
7. Line posts shall be braced horizontally and trussed diagonally in both directions at intervals not to exceed 1000′.
8. Post pockets to be centered in top of wall.
9. Typical end spans, braced in both directions, shall be constructed at changes in line where the angle of deflection is 15° or more.

Copyright Disclaimer

The logos and copyrights displayed on this website are the property of their respective owners. They are used here for informational and illustrative purposes only. Any unauthorized use, reproduction, or distribution of these logos and copyrighted materials is strictly prohibited. The presence of these logos does not imply endorsement or affiliation with this website or its content. All intellectual property rights pertaining to the logos and copyrighted materials remain with their rightful owners. For inquiries or concerns regarding the use of these logos or copyrighted materials, please contact the respective owners directly.